|
GPL Oil Grades 100 101 102 103 104 105 106 107
GPL Standard Grease Grades 200 201 202 203 204 205 206 207
GPL Extreme Pressure Grease Gr. 210 211 212 213 214 215 216 217
GPL Anti Corrosion Grease Gr. 220 221 222 223 224 225 226 227
______________________________________________________________________________________________
ISO Grade of Oil2 5 7 15 32 68 150 220 460
______________________________________________________________________________________________
Estimated Useful Range3
°C -70/66 <-70/104 -63/132 -60/154 -51/179 -36/204 -36/260 -30/288
°F <-94/150 <-94/220 -81/270 -76/310 -60/355 -33/400 -33/500 -22/550
______________________________________________________________________________________________
Oil Viscosity, cST ASTM D445
20°C (68°F) 7 16 36 80 180 550 810 1600
40°C (104°F) 4 8 15 30 60 160 240 440
100°C (212°F) -- 2 3 5 9 18 25 42
204°C (400°F) -- -- -- -- -- 3 3.9 6
260°C (500°F) -- -- -- -- -- -- 2.1 3
_______________________________________________________________________________________________
Oil Viscosity Index ASTM D2270 -- -- 59 121 124 134 134 155
_______________________________________________________________________________________________
Oil Pour Point ASTM D97
°C <-70 <-70 -63 -60 -51 -36 -36 -30
°F <-94 <-94 <-81 -76 -60 -33 -33 -22
_______________________________________________________________________________________________
Oil Density, g/ml
0°C (32°F) 1.87 1.89 1.91 1.92 1.93 1.94 1.95 1.95
100°C (212°F) 1.67 1.70 1.72 1.74 1.75 1.76 1.77 1.78
_______________________________________________________________________________________________
Maximum Oil Volatility, ASTM D972
% in 22 hr. (Modified)
@66°C (150°F) 11 2 2 1 1 1 <1 --
@121°C (250°F) 87 29 20 7 3 2 1 --
@204°C (400°F) -- -- -- -- -- 10 <5 <1
_______________________________________________________________________________________________
Oil Separation From Grease, FTMS 791B 321.1
Wt. Loss, %/30 hrs
@ 99°C (210°F) 18 9 7 5 4 4 3 3
@ 204°C (400°F) -- -- -- -- -- -- 11 10
________________________________________________________________________________________________
Oil, 4-Ball Wear Test, ASTM D4172
(20kg/107°C [225°F])/
1200 rpm / 60 min
Wear Scar. mm (±0.01)4 0.4 0.4 0.4 0.3 0.4 0.3 0.3 0.4
Friction Coefficient, (±0.003)4 0.08 0.07 0.07 0.08 0.07 0.07 0.08 0.08
________________________________________________________________________________________________
Oil, Falex Pin/ ASTM D3233
V-Block Load Carrying
Ability, Max Load, lbs. (gauge) 1375 1400 1250 1555 1450 >4500 >4500 >4500
Torque at Max Load, in-lb 30 31 32 35 32 56 65 65
1 This table gives typical properties (not specifications) based on historical production performance. Viscosity may very within ±10%. DuPont does not make any express or implied warranty that these products will continue to have these typical properties.
2 Approximate
3 Based on pour point and where evaporation is approximately 10%
4 Average standard deviation
#Back to Top
| 
